Skip to content
Red Eagle Fire Protection
A technician standing on plastic-covered cooking equipment reaches up to wipe the inside of a long stainless-steel exhaust hood in a restaurant kitchen at night, with fire-suppression pipes hanging from the hood.

Fig. 01Hood cleaning, on site

Kitchen hood & fire safety — Southern California

Commercial Kitchen Hood & Fire Safety Solutions

Hood installation, hood cleaning, fire suppression and extinguisher service, and rooftop repairs for commercial kitchens.

Services

  • 01Hood installation
  • 02Hood cleaning
  • 03Fire suppression service
  • 04Fire extinguishers
  • 05Fan & rooftop repairs

Hours

Open daily · 8 AM – 9 PM

Coverage

Serving Southern California

01Service map

Every point we service,in one system.

Nine checkpoints, from the fan on the roof to the extinguisher by the line. Follow a service visit top to bottom, or pick a checkpoint to see what we do there.

Fig. 02

ROOFCEILINGFLOORCOOK LINERISERK
What we do

Checkpoint 01 / 09

01On the roof

Rooftop exhaust fan

The fan pulls smoke and heat out through the whole system. When a motor fails or grease builds up around it, the kitchen feels it fast.

What we do here

CleanRepairReplaceInstall
  • Clean the grease around the fan
  • Change out failing exhaust fan motors
  • Replace fans that are worn out
  • Handle repairs on the roof around the fan

Warning signs

  • Squealing, rattling or vibration
  • Weak draw at the hood
  • Grease pooling on the roof

Related services

A simplified diagram for illustration. What a visit covers depends on your equipment, your building and local requirements.

02Services

The whole system,hood to rooftop.

Services that cover the exhaust system above your cook line and the fire-safety parts around it — looked after together, not piecemeal.

  1. A worker in a yellow hard hat and blue high-visibility vest stands beside a large stainless-steel kitchen hood, still wrapped in protective film and raised on a material lift, inside a commercial building under construction.

    New hood, still in protective film, staged on a material lift during a build-out.

    01

    Hood Installation

    Brand-new hoods ducted all the way to the roof, with a fire suppression system installed on every hood we put in.

  2. A technician wearing a headlamp and blue nitrile gloves uses a hand scraper on thick amber grease coating the back wall of a hood plenum, with the cook line below covered in plastic sheeting.

    Before: scraping heavy grease buildup from the hood plenum.

    02

    Hood Cleaning

    The entire hood cleaned top to bottom, all the grease around the exhaust fans, and the backsplash behind the line.

  3. DiagramFusible link — detection line
    03

    Fire Suppression Service

    The regular suppression service visit: fusible links and the CO2 cartridge changed out, nozzles cleared of grease, new extinguisher tags.

  4. DiagramClass K extinguisher
    04

    Fire Extinguisher Service

    Fire extinguisher servicing, replacement and hydrostatic testing, from the Class K unit at the cook line to the units by the doors.

  5. DiagramExhaust fan & motor
    05

    Exhaust Fan & Rooftop Repairs

    Exhaust fan motors changed out, fans replaced, and anything else on the roof that keeps your exhaust system running.

03Why Red Eagle

Why kitchenscall us.

Practical reasons, not slogans. This is how we approach every hood, fan and extinguisher we work on.

Credentials

  • Fire suppression system installation & service
  1. 01

    Commercial kitchen focus

    Hoods, exhaust fans and kitchen fire protection for restaurants and food-service kitchens are what we work on, day in and day out.

  2. 02

    Safety-first workmanship

    Equipment covered, work areas controlled, rooftop work done properly. No shortcuts on the parts that handle heat and grease.

  3. 03

    Ongoing service

    Regular suppression and extinguisher service, plus fan motor and rooftop repairs when something wears out.

  4. 04

    Responsive communication

    Straight answers on what we found, what needs doing now and what can wait — in plain language.

  5. 05

    Whole-system thinking

    We look at the hood, duct, fan and fire protection together, because a problem in one usually shows up in another.

04Process

How a jobruns.

Five steps from first call to final walkthrough. No surprises about what's being done or why.

Start with a call

(818) 457-7828

Open daily · 8 AM – 9 PM

  1. 01

    Step 01

    Request an inspection or consultation

    Call or send a request with your kitchen's location and what you're seeing — smoke, noise, grease or a new build-out.

  2. 02

    Step 02

    Discuss the kitchen and system needs

    We talk through your equipment, your hours and the history of the hood, fan and airflow.

  3. 03

    Step 03

    Receive an assessment and proposal

    We look at the system and lay out the recommended work, so you know the scope before anything is scheduled.

  4. 04

    Step 04

    Schedule service

    We set a time that works around your service hours to keep downtime to a minimum.

  5. 05

    Step 05

    Complete work and review next steps

    We finish the job, walk you through what was done and flag anything to watch before the next visit.

05From the field

Real work,shot on site.

Photos from our own jobs — before and after cleaning, installs in progress, and the rooftop work most people never see.

See more from the field
Underside of a commercial kitchen hood before cleaning: the interior panels carry an amber grease film and the front lip is streaked with grease drips, above a kitchen with stainless refrigerators and a wall sign reading KITCHEN.
before
AGrease film inside the hood and drips along the front lip.
Looking up at the inside front panel of the same stainless-steel kitchen hood after cleaning, with the metal wiped bright, hood lights and fire-suppression piping visible, and a drop ceiling below.
after
BHood panels wiped back to clean stainless.

Same job, same night. Shots taken from slightly different angles.

A long run of rectangular sheet-metal duct laid end to end on a concrete floor in a space under renovation, with a welding lead resting on top and two workers, a miter saw and a ladder in the background.
Fig. 03Duct sections laid out on site, with welding gear at hand.
Field clip
Fig. 04Crane lift to the roof.
A long duct section covered in silver foil-faced wrap printed with the 3M logo and bound with clear filament tape, lying on a protected floor in a space under construction.
Fig. 05Duct section in foil-faced 3M wrap, staged on site.

06Service areas

SouthernCaliforniakitchens.

Serving commercial kitchens across Southern California — call to confirm coverage for your location.

07FAQ

Commonquestions.

Straight answers about hoods, cleaning, extinguishers and scheduling.

All questions

Talk to the team

Keep Your KitchenRunning Safely.

Talk to Red Eagle about your commercial kitchen hood and ventilation needs.

Call direct

(818) 457-7828

Open daily · 8 AM – 9 PM

Call nowRequest an Inspection